Is the Gryphon Pro Crush right for you?
The Gryphon Pro, our heavy duty vetless model. Equipped with a squeeze, two anti-backing ratchet systems, and split gates on both sides, this grunty crush has been designed to take on bigger cattle/bulls and also calves where you need to squeeze up the internal width.
The head bail can be operated anywhere along the Crush by simply sliding the handle along the side, allowing the operator to control the Sliding Gate and Head Bail from any position—whether up by the head or at the back of the Crush, out of the line of sight.
Thanks to the diamond-shaped neck yoke, you no longer have to contend with cattle tossing their heads up and down once secured. We have limited the range of movement compared to models with a straight neck yoke design. If needed, we can provide a 'neck yoke insert' for calves that require a lower profile.
The Gryphon Pro is compatible with all Gallagher and Tru-Test gear, and we take great pride in being proud partners of Tru-Test. Click here to explore the range of Tru-Test products available through Onefarm.
10 Year Warranty
On the hot-dip galvanised steel
Designed in NZ
With high quality steel in conjunction with our engineers and valued customer feedback
Free Delivery
to your nearest Mainfreight
Steel Warranty
18-month structural warranty on all steel.
- Hot dipped galvanised after welding
- Split side gates on both sides of the Crush
- 2 x anti-backing heights - one shorter system for calves and the other for adult cattle
- Additional access gates within top half gates - great for EID wand access or injections around the neck area
- Squeeze system that reduces internal width of the Crush down to 410mm
- Mechanical locking head bail which can be operated anywhere along the Crush
- Compatible with off-side drafting handle kit
- Heavy duty slam latches with heavy duty rubber handles
- Heavy duty 80x50x4mm steel framing with additional bracing and gussets where it matters.
The Gryphon Pro Crush, our heavy duty vetless model.
The Gryphon Pro is available in both left and right hand operation, so this Crush can be retrofitted to any yard as required. Take a look at the infographic in the image carousel to decipher between left hand and right hand operation. Below are the key dimensions of the Gryphon Pro:
External Length
2.765m
Internal Length
2.4m
External Width (on ground)
850mm
Internal Width
750mm
Head Bail (Opening)
The walk-through head bail design means the head bail opening maxes out at 750mm when fully open.
HDG to NZAS Standard
Every Yard is full hot dipped galvanized after welding to NZAS standards
Frequently Asked Questions
Questions? We collected a few common ones below. Yours not there? Reach out and ask. The team is here to help.
Do you have more questions?
Speak to a specialist located in New Zealand. Our team are highly knowledgeable and happy to help you pick the right yard.
INFO@ONEFARM.CO.NZ
0800 ONEFARM
Still looking?
Gryphon Crush
+ GST
The Gryphon Crush is our 'Vetless' model, available in both left and right-hand operation to accommodate all yards. Each Gryphon comes equipped with an Off-Side Drafting Handle.
Phoenix Crush
+ GST
The Phoenix Crush is our 'Vet' model, available in both left and right-hand operation to accommodate all yards. Each Phoenix comes equipped with an Off-Side Drafting Handle.
Phoenix Pro Crush
+ GST
The Phoenix Pro, our heavy duty vet model. Equipped with a squeeze, two anti-backing ratchet systems, split gates on both sides, and vet access, this is as good as manual crushes get.